Home > News > Content

How To Use Foam Tape

Nov 21, 2017

1, before the removal of the surface paste adhesive dust, grease, and keep dry (not even in the rainy day wall wet condition paste). If it is used to paste the mirror, it is recommended to clean the surface with alcohol.

2, paste the working temperature should not be lower than 10 degrees, otherwise you can use the hair dryer properly heating adhesive tape and sticky veneer.

3, pressure-sensitive adhesive tape after 24 hours to play the best effect (when the adhesive tape should be pressed as possible), so paste the vertical load-bearing objects, such as mirror, etc., in the case of both sides have adhered to the first flat for 24 hours. If there is no such condition, the vertical adhesion within 24 hours, to support the object bearing.

Our main produces are of rubber and plastic slices, rolls and pipes for vibration prevention, acoustic absorption, heat insulation, seal, dust proof, filtration, etc. of various project, ship, locomotive, machinery, sports equipment, building, life utensil, etc. of complete varieties, top quality, high precision and standards.

welcome contact us!

Deqing Sanhe Rubber Plastic Co., Ltd.

Add:No. 99th Hua Bao Jie, gan Yuan Town, Deqing County, Zhejiang, China.

Contact us:Shadow Pan